Products & Solutions

Home

Text Size

Embedded Systems & Solutions

Military Communication Solutions

Project Staffing
Solutions

Military Communication Solutions:
Automated Tech Control Products
Cornet Technology, Inc. offers a range of strategic communications products ranging from the completely automated MTX switches to manual cap panels. These products can be adapted to a customer’s requirements. MTX-L A single-stage, non-blocked, crosspoint architecture that provides network reliability, availability, and fault tolerance. The MTX-L’s 1,024 non-blocking matrix design enables it to switch virtually all available interfaces. These interfaces range from low speed VF to high speed digital and video applications.


MTX-256 The MTX-256 with its compact non-blocking matrix switching engine requires only one standard equipment rack to support 2048 ports.

MTX-2
The MTX-2 is a 32-port high-speed, non-blocking, digital matrix switch that pacts the same functionality of larger MTX series
systems into a space saving 7” high chassis. The MTX-2’s single stage crosspoint switching is an efficient means of connecting any input to any output thus increasing reliability, speed, and ease of use. Since the entire “matrix engine” resides on the control/switch card, the number of cards and component are reduced.

Cap Panels
Connector Adapter Panel - BNC to 50-Pin Telco The TCT-6000 is a tactical communications terminal supporting three simultaneous nets and a Jack Box. The TCT-6000 can blend audio coming from three sources into a headset. This allows the operator to hear summed audio from the classified, unclassified, and intercom nets.

Cap Panels
Connector Adapter Panel - DB-15 to Telco 50-Pin This CAP panel is a low profile design with 32 DB-15 connectors on one side and three 50-pin Telco interface connectors on the other. The 50-pin Telco interface is labeled “Top”, “Middle”, and “Bottom”.

Cap Panels

Connector Adapter Panel - RJ45 to 50-pin Telco or 64-pin Telco
The RJ45-Telco Connector Adapter Panel (CAP) is designed to interface with two separate physical interfaces: Telco 64 pin connectors or Telco 50 pin connectors. The two designs are mutually exclusive; only one is used at a time. Each interface connector is cabled to specific RJ45 connectors mounted on the CAP front panel. All TELCO connectors are rear mounted.